深圳市海德模具有限公司

深圳市海德模具有限公司

NEWS
NEWS
首页
/
新闻资讯

新闻资讯

Precautions in plastic mold design

News Information

Precautions in plastic mold design

2021-11-02
The feed inlet shall be set at the thicker part of the product to ensure smooth and complete mold filling. It shall be set at a place that does not affect the appearance and function of the product as far as possible. The pull rod can be set at the edge or bottom and in the cold cavity near the gate to facilitate the demoulding of runner, large or flat products. It is recommended to use multi-point feeding to prevent product warpage, deformation and material shortage.
Precautions in plastic mold design

News Information

Precautions in plastic mold design

2021-11-02
The feed inlet shall be set at the thicker part of the product to ensure smooth and complete mold filling. It shall be set at a place that does not affect the appearance and function of the product as far as possible. The pull rod can be set at the edge or bottom and in the cold cavity near the gate to facilitate the demoulding of runner, large or flat products. It is recommended to use multi-point feeding to prevent product warpage, deformation and material shortage.
Precautions in plastic mold design

News Information

Precautions in plastic mold design

2021-11-02
The feed inlet shall be set at the thicker part of the product to ensure smooth and complete mold filling. It shall be set at a place that does not affect the appearance and function of the product as far as possible. The pull rod can be set at the edge or bottom and in the cold cavity near the gate to facilitate the demoulding of runner, large or flat products. It is recommended to use multi-point feeding to prevent product warpage, deformation and material shortage.
Ten factors affecting the quality of injection mold

News Information

Ten factors affecting the quality of injection mold

2021-08-03
Mold manufacturing is a complex process, from the design, processing, assembly, commissioning and other steps
Ten factors affecting the quality of injection mold

News Information

Ten factors affecting the quality of injection mold

2021-08-03
Mold manufacturing is a complex process, from the design, processing, assembly, commissioning and other steps
Ten factors affecting the quality of injection mold

News Information

Ten factors affecting the quality of injection mold

2021-08-03
Mold manufacturing is a complex process, from the design, processing, assembly, commissioning and other steps
上一页
1
2
搜索

Copyright 2021. 深圳市海德模具有限公司. All rights reserved. 粤ICP备2021078526号  技术支持 www.300.cn